Page 33 - Softbound_Edition_19_en
P. 33

Solenoid
 Solenoids                                                                                               Solenoids

 CHARACTERISTICS  DC  AC  Solenoid SIN45V
 Static pressure tightness   350 bar (seal diameter of valve    Totale stroke  (mm)   4  4  to VDE 0580
    max. 19 mm)  Working stroke        (mm)   1,7  1,7  Plug plate to ISO 4400 / DIN 43650
    With seal diameter of valve = 32 mm:  Nominal power       (W)   22
    Static pressure tightness = 120 bar  (VA)  25  Protection class IP65
 Coil winding insulation class  H (180 °C)  Armature weight  (kg)   0,024    0,024
 Connection / Power supply   Over device plug connection    Solenoid weight       (kg)   0,45  0,45
    to ISO 4400 / DIN 43650, (2P+E),    Voltage range       (VDC)   10-250
    other connections on request.              (VAC)          24-250
 Protection class to EN 60 529  IP65  DESCRIPTION  FUNCTION                       APPLICATION
 Relative duty factor   100 %  The SIN45V is a switching solenoid. Its design   When the solenoid is energised with the speci-  Essential for hydraulic directional and poppet
 Reference temperature   50 °C  corresponds to VDE standard 0580. The steel   fied nominal voltage, the armature moves from   valves. Because of the risk of overheating, the
 Seal   Viton, other on request  housing has a zinc coated finish as standard.   the starting position of its stroke (s = 5,5 mm) to   solenoid must never be used separately. The
 Fluid   Mineral oil, other fluid on request  Static pressure tightness is 160 bars. All o-rings   the end position (s = 0 mm). The switching time   lenght of the fixing screws depends on the base
 Switching cycles   15 000/h     12VDC   24VDC   115VAC  230VAC  are Viton. The solenoids are fixed to the valve   is essentially dependent on the application.   material of the body. An o-ring is used for the
 Mounting screws   4 x M4 (Quality 8.8)  Nominal resistance (Ω)   7,2   25   420   1'500  with four screws. Depending on the intended   The power-stroke characteristics are designed   valve seal. Information on screws and o-rings
 Housing   Zinc coated steel housing,    Number of windings (-)   800   1’550   5’930   11’400  use, the solenoid can be supplied with a plug   to suit the requirements of hydraulic valves.   will be found in the data sheets relating to the
    other surface treatments on request.  Inductivity (mH)   14   60   -   -  screw, or with integrated manual override. The   AC  versions  include  an  electronic  rectifier   valves concerned. Before changing the plug
            connector plate corresponds to ISO 4400 and   integrated into the connector plate. In this way   screw or the screw with integrated manual
            DIN 43650.                         maximum performance is assured.    override, care must be taken to ensure that the
                                                                                  solenoid is not under pressure. Risk of injury!
                                                                                  The maximum operating pressure is determin-
                                                                                  ded by the valve actually used.

                                               TYPE CODE
                                                                                          SI  N  45  V  -   -   #
                                               Solenoid
                                               Industrial execution
 PERFORMANCE  ACCESSOIRES                      Normal
 F = f (s)   Force-stroke characteristics      Square 45 mm housing
 Plug HB0   ∗ Article No. 239.2033
 Plug with integrated manual override HB4,5   ∗ Article No. 253.8000  Solenoid completly potted
 F [N]  ∗ acc. data sheet 1.1-300
                                                            N
 130  K0115                                    Nominal voltage U         12 VDC     G12
                                                                                    G24

                                                                         24 VDC
 120  Special manual override    see data sheet 1.1-310                  115 VAC    R115  ∗
                                                                         230 VAC    R230  ∗
 110  Plug grey   Article No. 219.2001         AC= 50 to 60 Hz
 Plug black   Article No. 219.2002             ∗ Rectifier integrated in the plug plate
 100
                                               Other nominal voltages and nominal power on request
 90
 80                                            with mounted screw plug (data sheet 1.1-300)   HB0
                                               with mounted manual override (data sheet 1.1-300)   HB6
 70                                            with mounted special manual override (data sheet 1.1-310)   H...
 60                                            Design-Index (Subject to change)
 50
 1          DIMENSIONS
 40
 30
 2                                                                                           11,2
 20
                                                                                                6
 10
 0            x0,75
 0  0.5  1  1.5  2  2.5  3  3.5  4  s [mm]  8  4,9   84                                                     6,5
              M
                                                26  55,5                                                       9,8  13,6
                                                                                5,5
 1: U = 100 % U N   Reference temperature = 20 °C (22W)
 2: U = 90 % U      Reference temperature = 50 °C
 N
 Solenoid in operating temperature (15W)
 The values refer to U  = 24VDC.  54,5    2,2                       35,36
 N
 With other nominal voltages deviations can occur.
 For curve 2 the solenoid has been mounted on a body  38 x 54.  64,2  45                         10*
                            74
            * Solenoid energised (s= 0 mm)
 Technical explanation see data sheet 1.1-400

 Wandfluh AG   Tel.  +41 33 672 72 72   E-mail:  sales@wandfluh.com   Illustrations not obligatory   Data sheet no.   Wandfluh AG   Tel.  +41 33 672 72 72   E-mail:  sales@wandfluh.com   Illustrations not obligatory   Data sheet no.
 Postfach   Fax  +41 33 672 72 12   Internet:  www.wandfluh.com   Data subject to change   1.1-110E 2/2   Postfach   Fax  +41 33 672 72 12   Internet:  www.wandfluh.com   Data subject to change   1.1-120E 1/2
 CH-3714 Frutigen                   Edition 17 01  CH-3714 Frutigen                                      Edition 06 20
                                                                                                            Page 33
   28   29   30   31   32   33   34   35   36   37   38