NEWS

Wandfluh has extended the proven flange poppet valves for the modular valve assembly with a execution for use in explosive, harsh and corrosive environments. The valve is made of stainless steel (AISI 316L) and can switch volumes up to 40 l/min at up to 350 bar. In the closed position, the metallically sealing seat closes the valve practically leakage-free. The universally usable valve has a large…

With its small and compact construction volume, volume flows of up to 200 l/min can be controlled at a pressure of up to 350 bar. Due to its high resolution, high volume flow and low hysteresis, the valve is perfectly suitable for demanding tasks. The nominal flow at a pressure drop of 10 bar is 90 l/min and can be sensitively controlled with a variable solenoid current by the pilot valve. Using…

The “DSV” electronics have been extended by the option of a 7-pole connector. This connector and its signal assignment correspond to the connection standards used in many places. The electronics are mounted fixed onto a solenoid coil and are used for simple control of a proportional valve. It can be slipped on practically all Wandfluh proportional valves as a slip-on coil.

By its compact…

The new Wandfluh hydraulique valves are direct operated valves in screw-in cartridge construction. These are available in two different sizes and cavities. The smaller models of the MDPPM16 and MGPPM16 series have been designed for a maximum flow of 6 l/min. The cartridge body is provided with a M16x1.5 thread. With the larger models in the MPPPU10 series, a maximum flow of 20 l/min can be…